For 2007-2014 Tahoe Suburban Xenon White LED 9005+H11 Hi/Low Beam Bulbs Combo
$ 23.23
Description
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model. Technical Specification: Plug Type: 9005 (High Beam) + H11 (Low Beam) LED Quantity(each bulb): 2pcs* 3570 CSP chips Luminous Flux: 40000LM/set (20000LM/bulb) Operating Voltage: DC 12V(fit 12V vehicles) Color Temperature: 6000K White IP68 rated water and dust seal, over 50000hrs lifetime Beam Angle: 360 degree Material: Aviation 6063 aluminum profile Operating Temperature: -40-80 degree Celsius Usage: headlight,fog light Advantage: *Latest 3570 CSP chip(USA) light source, 2 luminous faces no blind zone *Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light *6000K White light reflect road paint/signs better to show clearer road situation during night driving *270 degree low beam angle with cut-off line, will not dazzle oncoming traffic *Built-in constant current CPU, instant full brightness without start-up relay Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. 8.Please install car headlight dust cover to ensure the normal operation of the lamp Package Included: 4Pcs LED Bulbs 9005 (High Beam) + H11 (Low Beam) New and old packaging will be shipped randomly WARNING ABOUT POLARITY Unlike halogen bulbs, LED are polarity sensitive. BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. - if your light turns on, please proceed to install both bulbs onto your vehicle. - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle. Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. On Dec 9, 2024 at 19:38:33 PST, seller added the following information:
